2023 Yanmar V Series V12
- Year 2023
- Make Yanmar
- Model V Series
- Engine Model: TCD 3.6 L4
2023 Yanmar V Series V12
2023 Yanmar V Series V12
Engine
Engine
Model: TCD 3.6 L4
Engine Type
4-stroke
Engine Manufacturer
Deutz
Engine Power
Net rating at 2,200 rpm (SAE J 1349): (100 hp) 74.4 kW
Engine Torque
Max: 221 lb ft (300 Nm) @ 1,600 rpm
Displacement
220 in3 (3,600 cm3 )
Cooling
Intercooler, Water
Cylinder Liners
4 in line
Exhaust
gas optimised
Emissions
EPA Tier 4 Final / EC stage III B
Starter
12 V / 3.5 hp (2.6 kW) | Cold-starting aid: Glow plugs
Fuel System
Fuel Type
Turbo diesel
Fuel System
Common Rail
Drivetrain
Transmission
Hydrostatic drive, closed circuit, independent from loader hydraulics. Perfected driving automatics, automatic optimisation and adjustment of drawbar pull and speed. Hydraulic motor power shift providing two speed ranges. Infinitely variable speed control forward and reverse. 4-wheel drive from reduction gear on rear axle via cardan shaft to front axle. Inching pedal for sensitive driving and stopping at high rpm
Steering
Articulated, 2 steering cylinders with final positioning damping on both sides, fully hydraulic through Load-Sensing priority valve, quick and easy steering even at engine idle-running speed.
Gear Ratio (Primary)
Low: 0-3.7 / 0-11.8 mph (0-6 / 0-19 kph) | High: 0-6.8 / 0-22 mph (0-12 / (0-36 kph)
Brakes
Brake System Type
Service: Hydraulically actuated center-mounted disc brake, acting on all 4 wheels via 4-wheel drive | Auxiliary: Hydrostatic drive provides dynamic braking
Parking Brake
Mechanically actuated center-mounted disc brake on front axle
Wheels & Tires
Tires, Front Specification
405/70 R 20 SPT 9 Dunlop
Tires, Rear Specification
405/70 R 20 SPT 9 Dunlop
Battery
Battery
12 V / 100 Ah
Electric
Electrical
Nominal voltage: 12 V
Generator
14 V / 95 A
Operational
Operating Conditions
Breakout force at bucket edge (SAE J 732): 13,264 lbf (59,000 N)
Performance
Noise Level
Cab exterior: 101 dB (A) | Cab interior: 74 dB (A)
Hydraulics
Hydraulic Pump
Max: 20 gpm (78 l/min)
Maximum Pressure
Max Working: 3,625 psi (250 bar)
Dimensions
Dimensions
Load center from fork attachment point: 22" (560 mm) | Total steering angle: 80 deg.
Height
Total (top of cab): 9' 1" (2,780 mm)
Length
Total, bucket on ground: 17' 11" (5,480 mm) | fork tines 4" x 1.8" (100 mm x 45 mm): 44" (1,120 mm)
Width
Total: 6' 11" (2,100 mm) | of fork carrier: 49" (1,240 mm)
Turning Radius
at outside bucket edge: 15' 4" (4,680 mm)
Wheelbase
7' 6" (2,290 mm)
Capacities
Volume
General-purpose bucket (SAE J 742): 1.57 yd3 (1.20 m3 )
Oil capacity
Engine: 2 gal (8 l)
Fuel Capacity
Tank: 29 gal (110 l) | AD Blue Tank: 2.6 gal (10 l)
Cooling System
Engine: 3.9 gal (15 l)
Hitch Lift Capacity
at ground level (SAE J 732): 15,962 lbf (71,000 N)
Hydraulic Capacity
25 gal (93 l)
Load Capacity, Land
Tipping, straight at full reach (ISO 14397-1): 11,023 lbs (5,000 kg) | Tipping, articulated at full reach (ISO 14397-1): 9,700 lbs (4,400 kg) | Operating load (SAE J 1197) over the total lift and steering range: 4,188 lbs (1,900 kg) | Operating load in transport position, above ground level, total steering range: 6,834 lbs (3,100 kg)
Weights
Weight, In Running Order
(SAE J 1197): 15,432 lbs (7,000 kg)
Lights and Safety
Lighting
system in compliance with US/ISO standards, H7 headlamps
Features
Features
Axles: Rigid front axle with 45% limited slip differential. Oscillating rear axle with 45% limited slip differential. Center-mounted disc brake. Rear axle weights, 661 lbs (300 kg) are standard. | Stability factor: 2