2023 Exmark Lazer Z X-Series LZX801GKA606A1

CALL FOR CASH PRICE
MoreLess
Limited Time Offer!

Selling Price -$15,699.00

2023 Exmark Lazer Z X-Series LZX801GKA606A1

With our top-rated Lazer Z X-Series, there are plenty of boxes to check. For starters, it's now available as a 96-inch gas powered zero-turn mower. You can choose from five rugged, commercial-grade engines, including high efficiency Electronic Fuel Injection (EFI) options. Which also features our exclusive EGov and RED technology which can boosts fuel efficiency up to 41%. The X-Series also features our UltraCut™ Series 6 deck in 52-, 60-, 72-, and 96-inch cutting widths. Whatever combination you choose, operators will ride in unrivaled comfort thanks to our unique seating system. There’s even a standard 12-volt adapter to keep devices charged. So, if you’re looking for our top-of-the-line mower, the Lazer Z X-Series should be at the top of your list.

Features may include:

Patented RED Technology
  • Enabling communication and response between key systems on your mower with defined operation modes, system monitoring and clutch saver features.
A New Level of Comfort
  • Comfort increases productivity. That’s why we designed a new, ergonomically advanced seat system featuring our exclusive Iso-Mount Seat Isolation System.
Rear Discharge Deck
  • Available in 60 and 72 inch cutting widths, the rear discharge deck offers increased clipping discharge control, reduced noise, and the ability to trim on both sides of the cutting deck while keeping the operator clean.
UltraCut Series 6 Deck
  • This full-floating deck uses double-row bearings with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.
Productivity
  • Higher ground speeds with 16cc drive system and more power with larger engine displacements for improved productivity.
Tool-less Belt Removal
  • Deck and hydro belt can be installed without using any tools.
  • 2023
  • Exmark
  • Lazer Z X-Series
  • LZX801GKA606A1
  • Zero-Turn Mower
  • Kawasaki
  • 852
  • Series: V-Twin
  • 3,750 RPM
  • Heavy-duty canister air filtration system
  • 31 HP
  • Fuel Indicator: Electronic Sender
  • Gas Carbureted
  • Engagement: MagStop Electromagnetic 250-ft-lb clutch with spot brake
  • Hydro-Drive| Description: Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 cubic inch motors.
  • Control: Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
  • Lever-actuated disc brake.
  • 24 x 12.0-12, NPT Tractus® | Caster: 13 x 6.5-6, smooth-tread, semi-pneumatic.
  • Unibody, welded, heavy-duty 1.5" x 3" tubular steel.24 x 12.0-12, 4-ply Turf Master®
  • 12-volt battery with 15-amp alternator.
  • Infinitely variable speed selection from 0–11.5 mph (18.5 kmph) forward, 0–7.0 mph (11.3 kmph) reverse
  • Blade: Approximately 18,500 fpm.
  • Tractor: Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
  • Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
  • Casters: .50" thick caster yoke arms.
  • Blade Cutter Housing: 7.75" | Blade Shaft: 30mm (1.18")
  • Deck: 60"
  • 72.8 in. (184.9 cm)
  • Blades: 3 Blades at 20.50" | 83.1 in. (211.1 cm)
  • Cutting: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) | 70.5 in. (179.1 cm)
  • 12-gallon (45.4-L)
  • Curb: 1209
  • Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
  • Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. | Deck Style: Floating Deck | Style Description: Full-floating UltraCut Series 6 with heavy-duty spindle. Side discharge standard with the option to bag or mulch. | 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
  • 60
  • Fabricated
  • Kawasaki
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $15,699.00
  • Bartlesville, Oklahoma
  • New
  • 2023
  • Exmark
  • Lazer Z X-Series LZX801GKA606A1
  • Red, Black
  • 25.5
  • .5
  • Gas Carbureted
  • Available
  • 72.8 in. (184.9 cm)
  • Cutting: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) | 70.5 in. (179.1 cm)
  • 60
  • Fabricated
  • Kawasaki
Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.